Premium Filter Kit To Suit 5 Stage Reverse Osmosis No Membraner
Aqua Blue H2O Polyspun Sediment Water Filter Cartridge.
Fits in most standard 10" drop-in filter housing systems.
Used in residential, commercial, and food-service applications as a sediment filter or pre-filter.
10 x 2.5 Sediment replacement filter 5 micron x1
Suits all standard 10 inch housings
Premium filtration poly spun
Suitable for countertop or undersink water filter models
10" 5 Micron Sediment Filter
Manufactured from 100% pure polypropylene fibers
Filters out larger dirt and rust particles
High dirt-holding capacity and superior sediment filtration
Excellent bacteria and chemical resistance
Extends the life of primary filter cartridges
- 100% Polypropylene material for wide chemical compact
True multi-layered depth filtration
* Pressure drop will be determined based on feed water pressure, filter cartridge selection and port sizes, fluid viscosity, filter life and conditions.
Specifications
• Model Number: ABPP1025
• Min/Max Flow: 0 - 90 Lpm
• Min/Max Temperature: 4 - 52°C
• Min/Max Pressure: 20 - 800 kPa
• Micron rating: 5 Micron
• Size: Standard 2.5” x 10”
CTO Carbon Block 5 Micron Filter . The one micron carbon block filter effectively removes chlorine, chemicals, pesticides, unpleasant tastes and odour along with harmful heavy metals. Made from premium coconut-shell carbon, fresher, sweeter tasting water is ensured.
*99.9% of Metals & Chlorine
External compatible water filters with 1/4" pushfit connections You are buying Superior Quality compatible filters with push-fit connections.
External inline refrigerator water filter is a replacement cartridge for refrigerators that have externally fitted cartridges replaces:
Omnipure
- K5520-BB
- K2540-JJ
- K2533-JJ
- K2520-JJ
*External In-Line Water Filters
Specs
| Micron Rating | 1 micron |
| Length | 9 3/4" (24.8 cm) |
| Outer Diameter | 2 1/2" |
| Filter Media | Coconut Shell Carbon Block |
| Initial Pressure Drop | 2.0 psid |
| Temperature Rating | 40 - 125 °F |
| Filter Capacity | 15,000 Gallons |
| Change Frequency | 6 to 12 Months |
| Filter Certifications | NSF 42 |
This is for external compatible water filters with 1/4" pushfit connections
You are buying Superior Quality compatible filters with push-fit connections.
Installation and replacement procedure for the Compatible External fridge water filter:
1. Find isolation valve which will be located somewhere on the water supply line to the fridge. Turn it off and to depressurise the system draw a large glass of water from the water outlet at the fridge.
2. Have a bucket and towel ready as there will be a small spillage of water during this process. Remove the old filter by depressing the locking collar at each end of the filter with your thumb nail (or similar) and at the same time pull out the water supply line. Discard the old filter.
3. Take the new filter, making sure the flow direction is correct and insert the inlet side only, the line will go in approx 5 – 10mm and you will feel it hit home.
4. IMPORTANT - Placing the filter in the bucket, turn on the water supply and allow about 5 litres of water to flow through the filter and into the bucket. This will remov e any loose carbon fines. Turn off the water supply and connect the line that feeds into the fridge. Turn on the water supply and run approx 2 litres through the system.
5. Complete the Replacement Due sticker and place in a visible area inside the fridge door.
Note: The green light changes to orange after five months to indicate that you should soon change the water filter. It changes to red after an additional one month (6 months after the water filter was changed or installed) to indicate that you must change the water filter. If the water filter indicator lights up red, press the ICE TIMER and ICE MODE buttons at the same time for about three seconds to reset the water filter indication light from red to green.
Important: It is essential that operation, maintenance and filter replacement be carried out in accordance with manufacture's recommended procedures and guidelines for this product to perform as advertised. Failure to do so may void warranty
As with all built-in refrigerator water filters, the compatible external fridge water filter does not remove Fluoride.
Note: The filter provides cleaner, fresher water ice.
Important: Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. The contaminants or other substances removed or reduced by the water filter device are not necessarily in your water
View Installation Guide : Please CLICK here
Filter cartridge should be replaced at least every 6 months Water Filter Reduces the Following Health Related Contaminants:
97.60% of Chlorine Taste and Odour
98.40% of Particulates (Class I)
96.60% of Mercury at pH 6.5
88.90% of Mercury at pH 8.5
99.30% of Lead at pH 6.5
99.40% of Lead at pH 8.5
99.99% of Cysts
98.70% of Carbofuran
99.80% of p-Dichlorobenzene
99.00% of Asbestos
96.40% of Benzene
98.60% of Turbidity
BEST PRICE GUARANTEE
We aim to provide you with the best price available in Australia! If for any reason you find a better genuine online price, let us know where and we will match it.
Just email: info@waterfilterforfridge.com.au (please allow for freight component)
IF YOU ARE NOT 100% SATISFIED WITH YOUR PURCHASE WE OFFER A FULL REFUND OR REPLACEMENT.
waterfilterforfridge.com.au
We are the cheapest fridge part dealer in Australia
